Direction For Use:

• Apply one coat of Bison wall putty directly on bare surface with 40% (v/w) dilution in the first Coat.
• Allow it to dry 6-8 hours (preferably Overnight) Apply Second Coat of Bison Wall Putty woth 50% dilution (v/w)
• and allow it to dry overnight for best result.
• Wash it again next day with potable water thoroughly.
• Allow the surface to dry fully.
• For better results apply 1 coat of Illusion sealer (10% v/v).
• After drying fully apply 1st coat Berger Paints’ Bison Wall Putty mixed with 450 ml of potable water in 1  kg putty.
• Next day in the same way mix Berger Paints’ Bison wall putty with 500 ml of potable water.
• Shake well before using Berger Paints’ Bison putty.
• Do not over dilute Berger Paints’ Bison putty.
• Strain the material through a fine sieve before use.
• Keep the container tightly closed to prevent drying.
• Please keep out of reach of children and away from foodstuff.
• In case of contact with eyes, wash immediately with water and seek medical advice.
• Recommended Surface: – Sand/Cement, Plaster, Asbestos, Mivan Plaster, etc.
• Available in 20kg and 40kg Bags
• Color : White